Alat dan Bahan
- Router MikroTik
- Laptop / PC
- Kabel LAN (Ethernet)
- Aplikasi Winbox
- Sumber internet (modem/ISP)
- HP (untuk uji coba WiFi)
Langkah-Langkah Setting Wireless MikroTik
1. Koneksi ke MikroTik
- Hubungkan PC ke MikroTik menggunakan kabel LAN
- Buka aplikasi Winbox —> Klik Neighbors lalu pilih router → klik Connect
2. Setting Interface Wireless
Masuk ke Wireless → Interfaces
Klik wlan1
Ubah:
Mode: ap bridge
SSID: (isi nama WiFi, contoh: WiFi_Sekolah)
Klik Apply → OK
3. Setting DHCP Client
Masuk ke ip —> DHCP Client
klik Add (+)
Ether 1 —> apply & ok
4. Setting IP Address
Masuk ke IP → Addresses
Klik Add (+)
Isi:
Address: 192.168.10.1/24 (contoh)
Interface: ether 2
Klik Apply → OK
Klik Add (+)
isi:
Address:
interface: wlan 1
Klik Apply —> ok
5.. Setting DHCP Server
Masuk ke IP → DHCP Server → DHCP Setup
Pilih interface: ether 2 dan wlan 1
(2× Add)
Klik Next sampai selesai
6. Setting Internet (NAT)
Masuk ke IP → Firewall → NAT
Klik Add (+)
Tab General:
Chain: srcnat
Out Interface: (misal ether1/internet)
Tab Action:
Pilih masquerade
Klik Apply → OK
7. Aktifkan Security (Password WiFi)
Masuk ke Wireless → Security Profiles
Klik Add (+)
General —> mode: dynamics keys
Atur:
Authentication Types: centang semua
WPA2 Pre-Shared Key: isi password (min. 8 karakter)
Klik Apply → OK
8. Setting wifi interfaces
wireless —> wifi Interfaces
wireless —> mode : ap bridge
SSID: (isi sesuai kemauan, contoh: ABC)
security Profile: profile 1
Klik Apply —> ok
9. Uji Coba
Nyalakan WiFi di HP
Cari SSID yang sudah dibuat
Masukkan password
Cek apakah internet sudah bisa digunakan